Gun stocks wood blanks

A stockalso known as a shoulder stocka buttstockor simply a butt is a part of a rifle or other firearmto which the barrel and firing mechanism are attached, that is held against one's shoulder when firing the gun. Stocks are also found on crossbows though a crossbow stock would be more properly referred to as a tiller. The stock also transmits recoil into the shooter's body.

Diverse Quality Rare Wood Gunstock Blanks For Sale All One of a Kind

The term stock in reference to firearms dates to is derived from the Germanic word stocmeaning tree trunkreferring to the wooden nature of the gunstock. Early hand cannons used a simple stick fitted into a socket in the breech end to provide a handle. The modern gunstock shape began to evolve with the introduction of the arquebusa matchlock with a longer barrel and an actual lock mechanism, unlike the hand-applied match of the hand cannon. Firing a hand cannon requires careful application of the match while simultaneously aiming; the use of a matchlock handles the application of the slow matchfreeing up a hand for support.

With both hands available to aim, the arquebus could be braced with the shoulder, giving rise to the basic gunstock shape that has survived for over years. Ironically, the stocks of muskets introduced during the European colonization of the Americas were repurposed as hand-to-hand war clubs [6] [7] by Native Americans and First Nations when fragile accessories were damaged or scarce ammunition exhausted.

Techniques for gunstock hand weapons are being revived by martial arts such as Okichitaw. A gunstock is broadly divided into two parts see above. The rear portion is the butt 1 and front portion is the fore-end 2. The butt is further divided into the comb 3heel 4toe 5and grip 6. The stock pictured is a thumbhole 7 style. The most basic breakdown of stock types is into one-piece and two piece stocks. A one piece stock is a single unit from butt to fore-end, such as that commonly found on bolt action rifles.

Two piece stocks use a separate piece for the butt and fore-end, such as that commonly found on break open shotguns, and lever-action rifles and shotguns. Traditionally, two piece stocks were easier to make, since finding a wood blank suitable for a long one piece stock is harder than finding short blanks for a two piece stock. The grip area is one that varies widely.

A straight grip stock A proceeds smoothly from toe to the trigger, giving a nearly horizontal angle for the trigger hand, while a full grip stock E contains a separate piece for the grip, providing a near vertical angle for the trigger hand, and is commonly found on modern military rifles, such as the ubiquitous AK and M16 rifle families of assault rifles.

The semi-grip B stock is perhaps the most common sporting stock, with a steeper angle cut into the stock to provide a more diagonal angle for the trigger hand.

Modern target style stocks have moved towards a fuller, more vertical grip, though built into the stock rather than made as a separate piece, and may be considered grip stocks. Sliding or folding stocks are often seen on military-grade weapons and their civilian-derived arms. A collapsible stock makes the weapon more compact for storage or transport, but is usually deployed before shooting for better control.

A butt hook, which is an attachment to the butt of the gun that is put under the shooter's arm to prevent the rifle from pivoting forward from the weight of the barrel is sometimes used in competitive rifle shooting. The comb is another area of wide variation. Since the comb must support the shooter's cheek at a height suitable for use with the sights, high sights such as telescopic sights require higher combs.

The Monte Carlo comb B is commonly found on stocks designed for use with scopes, and features an elevated comb to lift the cheek higher, while keeping the heel of the stock low. A cheekpiece C is a raised section on the side of the stock, which provides support for the shooter's cheek.

There is some confusion between these terms, as the features are often combined, with the raised rollover cheekpiece D extending to the top of the stock to form a high Monte Carlo comb.

Fore-ends tend to vary both in thickness, from the splinter fore-ends common on British side-by-side shotguns to the wide, flat bottomed beavertail fore-ends found on benchrest shooting guns, and in length, from the short AK style to the long Mannlicher stock that runs all the way to the muzzle. Most common on sporting firearms is the half-stockgun stocks wood blanks extends roughly half the length of the barrel.

Stock measurements are important regarding target rifle stocks if competing in IBS or NBRSA registered matches. The target rifle stocks must meet certain dimensional and configuration criteria according to the class of competition engaged in. Stock dimensioning is especially important with shotgunswhere the typical front-bead-only sight requires a consistent positioning of the shooter's eye over the center of the barrel for good accuracy.

When having a stock custom built or bent to fit, there are a number of measurements that are important. In addition to ergonomic issues, the stock can also have a significant impact on best iphone forex trading apps accuracy of the rifle.

The key factors are:. A well designed and well built wooden stock can provide the secure, stable base needed for an accurate rifle, but the properties of wood make it more difficult than more stable synthetic materials. Wood is still a top choice for aesthetic reasons, however, and solutions such as bedding provide the stability of a synthetic with the aesthetics of wood.

Traditionally, stocks are made from woodgenerally a durable hardwood such as walnut. A growing option is the laminated wood stock, consisting of many thin layers of wood bonded together at high pressures with epoxyresulting in a dense, stable composite. Regardless of the material actually employed, the general term "furniture" is often applied to gunstocks by curators, researchers and other firearm experts.

Folding, collapsible, or removable stocks tend to be made from a mix of steel or alloy for strength and locking mechanisms, and wood or plastics for shape. Stocks for bullpup rifles must take into account the dimensions of the rifle's action, as well as ergonomic issues such as ejection.

While walnut is the favored gunstock wood, many other woods are used, including maplemyrtlebirchand mesquite. In making stocks from solid wood, one must take into account the natural ndf clearing house and variability of woods. The grain of the wood determines the strength, and the grain should flow through the wrist of the stock and out the toe; having the grain perpendicular to these areas weakens the stock considerably.

In addition to the type of wood, how it is treated can have a significant impact on its properties. Wood for gunstocks should be slowly dried, to prevent grain collapse and splitting, and also to preserve the natural color of the wood; custom stockmakers will buy blanks that have been dried two to three years and then dry it for several additional years before working it digital put call parity a stock.

Gun stocks wood blanks selection can yield distinctive and attractive features, such as crotch figure, feathering, fiddleback, and burl, which can significantly add to the desirability of a stock.

Blanks for one piece stocks are more expensive than blanks for two piece stocks, due to the greater difficulty in finding the longer blanks with desirable figure. Two piece stocks are ideally made from a single blank, so that the wood in both parts shows similar color and figure. While setup costs are high, once ready to produce, injection molding produces stocks for less than the cost of the cheapest wood stocks. Every stock is virtually identical in dimension, and requires no bedding, inletting, or finishing.

The downsides are a lack of rigidity and thermal stability, which are side effects of the thermoplastic materials used for injection molding. A hand-laid composite stock is composed out of materials such as fiberglass, kevlar, graphite cloth, or some combination, saturated in an appropriate binder, placed into a mold to set, or solidify.

The resulting stock is stronger and more stable than an injection-molded stock.

It can also be as little as half the weight of an injection-molded stock. Inletting and bedding can be accomplished by molding in as part of the manufacturing proceess, machining in the inletting after the stock is finished, molding directly to the action as a separate process, or molding a machined metal component in place during manufacture.

Finish is provided by a layer of gel coat applied to the mold before the cloth is laid up.

Laminated wood consists of two or more layers of wood, impregnated with glue and attached permanently to each other. The combination of the two pieces of wood, if laid out correctly, results in the separate pieces moderating the effects of changes in temperature and humidity.

The resulting composite material is far stronger than the original wood, free from internal defects, and nearly immune to warping from heat or moisture.

Typically, each layer of the laminate is dyed before laminating, often with alternating colors, which provides a pattern similar to wood grain when cut into shape, and with bright, contrasting colors, the results can be very striking.

The disadvantage of laminate stocks is density, with laminates weighing about 4 to 5 ounces to g more than walnut for a typical stock. While wood laminates have been available for many years on the custom market and, in subdued form, in some military riflesin Rutland Plywood, a maker of wood laminates, convinced Sturm, RugerSavage Armsand U.

Repeating Arms Company Winchester to display some laminate stocks on their rifles in a green, brown and black pattern often called camo.

The response was overwhelming, and that marked the beginning of laminated stocks on production rifles. Some high production firearms such as the PPSMPand the Zastava M70B make use of metal stocks in order to have a strong, thin stock that can be folded away in order to make the weapon more compact. It should be noted that even a skeletal steel stock is often heavier than the equivalent wooden fixed stock.

Consequentially, less cost-sensitive designs like the FN Minimi make use of aluminium or lighter-than-steel alloys. A few designs, like the Accuracy International Arctic Warfareuse a metal chassis which securely beds the components of the firearm, with non-structural synthetic panels attached for ergonomics. In some jurisdictions, the nature of the stock may change the legal status of the firearm.

Examples of this are:. Revolver with a wooden detachable stock.

Home - Wenig Custom Gunstocks

AK with a three piece stock consisting of butt, grip and fore-end. From Wikipedia, the free encyclopedia. Redirected from Stock firearm. SIG rifle with folding stock. Archived from the original on Archived from the original — Scholar search on October 23, Bureau of Alcohol, Tobacco, Firearms and Explosives.

Retrieved from " https: Navigation menu Personal tools Not logged in Talk Contributions Create account Log in. Views Read Edit View history. Navigation Main page Contents Featured content Current events Random article Donate to Wikipedia Wikipedia store. Interaction Help About Wikipedia Community portal Recent changes Contact page.

Tools What links here Related changes Upload file Special pages Permanent link Page information Wikidata item Cite this page. In other projects Wikimedia Commons. This page was last edited on 15 Juneat Text is available under the Creative Commons Attribution-ShareAlike License ; additional terms may apply.

By using this site, you agree to the Terms of Use and Privacy Policy. Privacy policy About Wikipedia Disclaimers Contact Wikipedia Developers Cookie statement Mobile view.

Wikimedia Commons has media related to Stock firearm.